Dentsply Esthet-X Flow Flowable Composite

Description

Flowable liquid micro hybrid restorative with pseudoplastic handling; stacks cleanly in a Class V yet flows in a Class II prep. Low polymerization shrinkage comparable to traditional hybrid materials provides improved marginal integrity. Radiopaque.

Optimized filler technology means Esthet•X HD provides easy-to-polish, highly esthetic restorations.

• Immediate stacking
• No run-off and no slumping
• Even coating

Why buy Dentsply Esthet X Flow Flowable Composite from us?

• Best online deal for DENTSPLY ESTHET-X FLOW FLOWABLE COMPOSITE in India.
• Cheapest online price for DENTSPLY ESTHET-X FLOW FLOWABLE COMPOSITE in India.
• Easy delivery and fast returns. 
• Smooth processes and hassle-free experience.
• Run by Dentists for Dentists

Additional information

Esthet•X flow liquid micro hybrid restorative provides the strength, wear resistance, and low shrinkage of a hybrid composite, in a smart, pseudoplastic handling. The materials unique handling allows it to stack when dispensed without slumping and to flow on command when manipulated with an instrument. Available in ten shades (7 Vita and 3 accessory) and a choice of delivery methods.

Esthet X flow Liquid Micro Hybrid Restorative A1 Syringe Refill includes: 2 x A1 Syringe (1.3g)

Esthet-X Flow utilizes a proprietary formulation with pseudoplastic handlingthat enables it to stack immediately as it?s placed into a Class V prep. No run-off, no slumping, and no extra time cleaning up after the material as you would have with a traditional flowable.

For a Class II, simply syringe Esthet-X Flow onto the prep floor and walls. Slight instrumentation is all that is needed to immediately make the material more fluid, allowing it to adapt to the anatomy of the prep. This ensures an even, complete coat every time.

INDICATIONS:

• Class V restorations
• Conservative Class III restorations
• Conservative Class I restorations

CONTRAINDICATION:

• For use with patients who have a history of severe allergic reaction to methacrylate resins

Watch Video

Esthet-X Flow utilizes a proprietary formulation with pseudoplastic handling that enables it to stack immediately as it?s placed into a Class V prep. No run-off, no slumping, and no extra time cleaning up after the material as you would have with a traditional flowable.

For a Class II, simply syringe Esthet-X Flow onto the prep floor and walls. Slight instrumentation is all that is needed to immediately make the material more fluid, allowing it to adapt to the anatomy of the prep. This ensures an even, complete coat every time.

The Esthet-X Flow liquid is a micro hybrid composite, utilising a proprietary formulation with pseudoplastic handling, enabling it to stack immediately as it is syringed.

Slight instrumentation is all that is needed to immediately make the material more fluid.

Placement of Esthet-X flow Restorative

STEP 1:

• Remove cap from the end of the syringe. To assure free flow of material from syringe, express a small amount onto pad, away from the patient field.

STEP 2:

• Attach disposable, gray dispensing tip to end of the syringe. Turn tip clock wise 1/4 to 1/2 turn to assure that it is fully seated. Tug on tip to be sure that it is locked into the collar of the syringe.

STEP 3:

• Esthet-X flow restorative should flow freely with gentle pressure. DO NOT USE EXCESSIVE FORCE. If more than gentle pressure is required, remove from patient field and check for obstruction.

STEP 4:

• Discard and Properly Dispose Dispensing Tip IMMEDIATELY AFTER USE. Replace Original Cap. Do not store syringe with dispensing tip in place.

NOTE: It is recommended to pull back slightly on the syringe plunger after use to prevent excessive flow of material.

STEP 5:

• For Class I, Class III and Class V restorations. Dispense Esthet-X flow
  restorative directly into preparation site/surfaces. Cure each increment for 20 seconds. In deeper preparations exceeding 3 mm it is recommeded to place material in 2mm increments, thoroughly light curing each increment for 40 seconds. For maximum light transmission and to minimize finishing,avoid overfilling cavity. Be sure to expose each area of the entire restoration to the curing light cycle. Additionally, the restorations should be cured through any remaining tooth structure for an additional 20 seconds.Important Note: A curing unit with an output of at least 300 mW/cm2 should be used.

STEP 6:

• For use as a liner in a cavity preparation. Dispense Esthet-X flow restorative directly into preparation site/surfaces. It is recommended to cure the liner application for 40 seconds.

STEP 7:

• Proceed immediately to placement of restorative material per each material’s directions for use(e.g., Esthet-X, TPH Spectrum,SureFil) without disturbing liner surface.

NOTE: A curing unit with an output of at least 300 mW/cm2 should be used.

Finishing and Polishing

STEP 1:

• Begin finishing immediately after curing. Due to the “stackable” nature of Esthet-X flow, precise placement is possible, and should be observed, minimizing the need for gross finishing.

STEP 2:

• If necessary, gross excess may be removed with Prisma Finishing Burs or other carbide or fine diamond finishing burs. Preferrably, finishing is obtained by use of Enhance Discs, Cups or Points and interproximal strip.

STEP 3:

• After finishing, a high luster can be obtained by polishing with the PoGo
  polishing system or Prisma Gloss, followed by Prisma Gloss Extra Fine
  on an Enhance foam cup.