3M Filtek Bulk Fill Flowable Restorative Refills
₹3,900.00
Make posterior restorations quick and smooth with 3M ESPE’s Bulk Fill Flowable Restorative. 3M™ Filtek™ Bulk Fill Posterior Restorative is your one-step bulk placement solution designed to improve productivity by allowing fast and easy posterior restorations.
✓ One-step placement, no additional capping layer
✓ Fast and easy procedure
✓ Excellent adaptation without additional expensive dispensing devices
✓ Stress relief to enable up to 5mm depth of cure
✓ Better in-vitro wear resistance than market-leading bulk fill materials
✓ Excellent handling and sculptability
✓TRUE nanofiller technology and 2 innovative methacrylate monomers act to lower polymerization stress without compromising on wear
Email when stock available
- Description
- Additional information
- Reviews (2)
- Features
- Packaging
Description
3M Filtek Bulk Fill Flowable Restorative
3M ESPE Filtek Bulk Fill is a flowable restorative material with a 4 mm depth of cure, reducing the need to incrementally layer restorative material. This composite is designed for low shrinkage and low polymerization stress, while the flowable viscosity is designed to provide good adaptation. When used for Class I and Class II restorations, Filtek Bulk Fill can be used as a base layer and should be covered with 2 mm of composite strong enough handle the occlusal load. Filtek Bulk Fill can also be used for pit and fissure sealants, Class III and V restorations, core build-ups where at least half the coronal tooth structure is remaining, restoration of minimally invasive cavity preparations, blockout of undercuts, and repair of resin and acrylic temporary materials. Filtek Bulk Fill is packaged in 2 g syringes and 0.2 g unit-dose capsules and is available in shades U (Universal), A1, A2 and A3. Curing time is at least 20 seconds for shade U and 40 seconds for shades A1, A2 and A3. Filtek Bulk Fill was evaluated by 20 consultants who placed 877 restorations. This bulk-fill composite received a 91% clinical rating.
Features:
- Up to 50% stronger than the leading bulk fill flowable.
- Nearly twice the wear resistance of leading bulk fill flowables.
- Choice of deliveries: easy-to-use capsules or syringes.
- Orange color is easy to identify—and ask for.
- 5 Shades: A1, A2, A3, Universal
Additional information
| Weight | .010 kg |
|---|---|
| Dimensions | 8 × 5 × 5 cm |
2 reviews for 3M Filtek Bulk Fill Flowable Restorative Refills
Add a review
3M Filtek Bulk Fill Restorative gives the clinician two delivery options – syringes and capsules. Both are well marked and are easy to identify by their orange coloring. The ability to use this composite for indications common to flowable composites and as a bulk-fill base layer make it a versatile product to keep in the office. The shades are translucent, which allows a greater depth of cure. Minimizing the number of layers to complete a restoration was reported to be a real time saver for many consultants. Filtek Bulk Fill has a viscosity that stacks well and does not slump or run. In some cases an instrument is needed to adapt this flowable material to the cavity walls. Some consultants noted that the material contained bubbles upon extrusion from the syringe or capsule. Thirty-five percent of consultants rated Filtek Bulk Fill better than other bulk-fill composites they were using and 30% rated it to be equivalent. Fifty percent would switch to Filtek Bulk Fill and 75% would recommend it to a colleague.
Indications:
- Base under Class I and II direct restorations
- Liner under direct restorative materials
- Pit and fissure sealant
- Restoration of minimally invasive cavity preparations (including small, non-stress-bearing occlusal restorations)
- Class III and V restorations
- Undercut blockout
- Repair of small enamel defects
- Repair of small defects in aesthetic indirect restorations
- Repair of resin and acrylic temporary materials
- As core build-up where at least half the coronal tooth structure is remaining to provide structural support for the crown
2 – 4g Syringes of Shade A2 & A3 . 4g -Bottle shade A2 & A3
Dr Doris –
50% stronger than the leading bulk fill flowable. Good
Dr. Tanushmita –
Provides fast and easy solution for bulk fill applications in both anterior and posterior regions. Much more stronger than its competitors.