Waldent Sandyo Airotor Super Torque Head (Chuck Type)

Description

• For dental surgeries
• Precision-engineered for power and reliability required to perform clinical procedures
• New Ceramic turbine cartridge with Japan technology delivers increased smoothness
• Bur retention system engineered to securely retain bur under increased torque loads
• For dental applications include cavity preparation, preventive dental procedures, preparation of abutment tooth for fixed partial dentures, endodontic treatment, and many more.
• Lightweight for better ergonomics during dental procedures. Helps to increase life span of bearing
• Provides an antimicrobial environment.

Additional information

FAQ

1. What is the use of Waldent Sandyo Airotor?

Ans. Waldent Airotor can be used for restorative, endodontic, oral surgery, prosthodontic and for many more dental procedures.

2. What is the use of water in Waldent Sandyo Airotor?

Ans. Water in the Airotor acts as a coolant, necessary to prevent the Airotor and bur while cutting the tooth from heating up.

3. Is the Waldent Sandyo  Airotor noise-free?

Ans. The Waldent Sandyo Airotor creates very less noise between the permissible range of 50 -70 DB.

4. What type of bearing does the Waldent Sandyo Airotor consist of?

Ans. The Waldent Sandyo Airotor has ceramic bearings.  The Ceramic bearings are harder than Stainless Steel bearing thus improves durability & also don’t get rust & thereby require less maintenance.

5. What type of dental chair connection does Waldent Sandyo Airotor require?

Ans. Waldent Airotor require Bordon 2-holes connection with the dental chair.

6. What should be the working pressure for the Waldent Sandyo Airotor?

Recommended working pressure for the Waldent Airotor is 0.25-0.30 (MPa).

7. Is the Waldent Sandyo Airotor push or chuck type?

Waldent Sandyo Airotor has a push button.

8. Does the Waldent Sandyo Airotor require extra coupling for the attachment?

No, Waldent Sandyo Airotor does not require extra coupling. They can be easily attached or get fitted to the inbuilt coupling of the dental chair. However, the need of extra coupling is needed with the disposable Waldent Airotor or if the chair has coupling other than Bordon 2-Holes coupling.

9. How long the Waldent Sandyo Airotor cartridge last?

There is no fix duration till which cartridge can work or survive. The life of the cartridge depends on many factors including type of bur used, length of bur, lubrication method, type of sterilizer, number of uses, maintenance & sterilization practice of the individual.

10. What types of Bur are compatible with Waldent Sandyo Airotor?

Ans. Any type of dental bur which is ISO Standardized can be used with Waldent Sandyo Airotor.

11. How to change the Bur in Waldent Sandyo Airotor?

Ans. The bur can be changed by pressing the push button (present on the head of the Waldent Airotor) with the tip of the thumb.

12. If the bur in the Waldent Sandyo Airotor have shaking or wobbling motion?

Ans. If the Waldent Airotor is showing shaking motion then bearing might got damaged and need the replacement.

13. What type of water supply should be used with the Waldent Sandyo Airotor?

Ans. The recommended water for the Waldent Sandyo Airotor is distilled water. Tap water or RO water causes salt deposition in the bearings and thus reducing its life span.

14. How to maintain the Waldent Sandyo Airotor?

• Disconnect handpiece from the tubing.
• Put 2- 3 drops of good lubricant at driven air orifice at rear of the handpiece.
• Reconnect the Airotor to the tubing & run for 10 seconds to expel the excess oil out (never run the Airotor without the bur).
• Remove the bur from the Airotor.
• Disconnect the Airotor from the tubing.

15. Which lubricant to use with Waldent Sandyo Airotor?

Ans. Any good branded lubricant oil recommended for Airotor can be used.

16. How to sterilize the Waldent Sandyo Airotor?

Ans. The Waldent Airotor can be sterilized by Autoclaving at 135° Celsius.

17. How to prepare the Waldent Sandyo Airotor for sterilization procedure?

Ans.

• Keep handpiece in vertical position and scrub with soft brush and warm water to remove debris.
• Dry the external surface of Airotor with paper towel (do not immerse in the disinfectant solution).
• Lubricate the handpiece as per FAQ No. 14
• Seal the Airotor in the sterilization bag.
• Autoclave at temperature of 135° Celsius.
• Allow the Airotor to cool at room temperature before operating.
• For LED Airotor, after cooling gently clean LED Light with cotton swab dampened with isopropyl alcohol.
• Water Port Cleaning – As needed, periodically clean the water port(s) with cleaning tool/wire.

18. How much warranty does Waldent Sandyo Airotor has?

Ans. The Waldent Sandyo Airotor has six months warranty against the manufacturing defects (on cartridge).

INDICATION :

• Used in various dental procedures such as restoration, tooth preparation for dental prosthetics, orthodontic applications, and various other dental uses.

COMPOSITION : 

• Material Made up of Stainless steel.

ADVANTAGE :

• Corrosion Resistant – Passivated.
• High-grade material with a stylish design.
• Push-button & chuck type cartridge to change bur.
• Better Grip.
• 1/3 Get Water Spray effective cooling of bur and treating contact surface.
• Exclusive Design.
• Sleek Body.
• Excellent Texture
• Ceramic ball bearing – long life span.
• High-speed handpiece.
• Extra-torque & superior cutting efficiency.
• Head Size – Mini head, Super torque & Standard head.
• Optimal power.
• Optimum cooling of the treatment site with 3x spray.
• Two-hole Bordon Chair connection.
• Corrosion Resistant.
• Autoclavable at 135-degree Celsius.

Packaging

• 1 x Sandyo Airotor.

Warranty

• Manufacturer/Importer warranty of 6 months as applicable for this product.